Woodworking For Beginners: How To Make A Rustic Hanging Planter

Eager to try your hand at woodworking? Start with a small project, something simple to give you an thought of what's possible and how similar projects could be done in the hereafter. Nosotros have the perfect idea: a hanging planter. It's quite easy to put together and at the end of it all you'll accept something that's both useful and pretty.

The supplies needed for this hanging wood planter:

forest slats
handsaw
wood board
wood glue
spot glaze
greenish acrylic paint
pigment brush
rope
scissors
hot glue gun

How to craft this hanging planter:

Step 1: Cut the slats into modest pieces

You basically need two woods slats for this project, ane that's square and one that's thinner and rectangular but of course that's non necessarily a rule set in stone. If you lot have some leftover wood supplies you tin can endeavour to get in piece of work with any is available. In any case, go ahead and cutting your slats into smaller pieces. You lot should terminate up with 12 pieces in total in the end.

Step 2: Pigment the woods pieces

Once they're all cut to size, go alee and paint all these woods pieces. We chose a dark light-green acrylic pigment for this just you tin can get with a unlike dash or try a combination of colors if you want to. Merely make sure y'all pigment all the pieces and you cover all the sides.

Step 3: Stain the lath

Yous're also going to use a thin wooden board for this projection. This one is square in shape and has been chosen based on the rest of the supplies involved and the terminate design. In this footstep y'all need to apply a layer of spot coat onto the board to give it a nice finish. Go with whatever color or finish yous prefer.

Pace 4: Make 2 frame rectangles using forest pieces and glue

Make certain all the paint on these wood pieces has stale before you lot do this. Combine them into sets of 4 (ii bigger ones and ii smaller ones) ad glue them together to brand a rectangular frame. Yous'll need to make two of these and they should have matching proportions and dimensions. Secure the pieces together with forest gum.

Step 5: Secure the frames onto the lath

Let the glue dry and gear up for a bit then take the two rectangular frames and position them onto the base board. Then connect them with two boosted green pieces of woods and the bottom then it all starts to look like a frame. Do this without the glue kickoff and then you get an thought of where to identify each slice, so use mucilage to secure the pieces in place.

Step 6: Attach the 2 final pieces to complete the frame

At this point y'all should nevertheless have two small pieces of forest leftover. Take these and utilize them to complete the frame past using them to connect the side frames at the top. One time once more, utilize some wood glue to get this done and wipe off the excess.

Stride 7: Add a rope handle

We mentioned that this is going to be a hanging planter and at this bespeak in that location's goose egg to indicate that. This is where the rope comes into play. You lot're going to use it to add a handle to the planter. Cut out a piece of rope and wrap it effectually the wooden frame equally you meet here. When you're happy with the length, use your hot glue gun to secure the rope onto the planter. After that, you're all done!